General analysis of the rare B<Subscript>c</Subscript>→D<Subscript>s</Subscript><Superscript>*</Superscript>ℓ<Superscript>+</Superscript>ℓ<Superscript>-</Superscript> decay beyond the standard model

The general analysis of the rare B_c→D_s ^*ℓ⁺ℓ^- decay is presented by using the most general, model independent effective Hamiltonian. The dependencies of the branching ratios and of the longitudinal, normal and transversal polarization asymmetries for ℓ^- and the combined asymmetries for ℓ^- and ℓ⁺ on the new Wilson coefficients are investigated. Our analysis shows that the lepton polarization asymmetries are very sensitive to the scalar and tensor type interactions, which will be very useful in looking for new physics beyond the standard model.     

Acoustic Analysis Findings in Objective Laryngopharyngeal Reflux Patients

OBJECTIVE: The aim of this study was to identify the effects of objective laryngopharyngeal reflux (LPR) on the acoustic parameters of patients by comparing their voice samples with that of control subjects. STUDY DESIGN: Prospective study in two tertiary reference hospitals. METHODS: 48 consecutive patients with symptoms related to LPR and 64 control subjects were included in the study. Suspected LPR patients underwent a 24-hour ambulatory pH monitoring, and 25 (52%) of them were shown to have objective LPR. Acoustical evaluation results of objective LPR patients were compared with that of symptomatic LPR patients and control subjects. RESULTS: All frequency perturbation values obtained from objective and symptomatic LPR patients were higher than the control subjects (P<0.01). Mean fundamental frequency, amplitude perturbation measures, and noise-to-harmonics ratio were not significantly different between groups. CONCLUSION: LPR patients have significantly different frequency perturbation values than control subjects.     

A novel (E,E)-dioxime and its mono-, di- and trinuclear complexes bearing tetradentate octyl sulfanyl phenylamino substituents. Synthesis,characterization and electrochemical properties of its transition metal complexes

A new vic-dioxime, 13,14-bis-(hydroxyimino)-9,12,15,18-diazadithiaoctacosane, has been synthesized from 2-octylsulfanylaminobenzene and (E,E)-dichloroglyoxime. Mononuclear transition metal complexes of Ni^II, Cu^II, Co^II and Fe^II have been prepared and were found to have a metal–ligand ratio of 1:2. The synthesis of di- and trinuclear complexes was achieved with U^IVO₂ and Cu^II depending on the stoichiometry of the reactants. The complexes were characterized by elemental analysis, ¹H-n.m.r., u.v.–vis, i.r., f.a.b.-m.s. and by cyclic voltammetry.     

Synthesis,spectral properties,and antimicrobial activity of 2-arilamino-2,4,4,6,6-pentachloro-1,3,5,2λ<Superscript>5</Superscript>,4λ<Superscript>5</Superscript>,6λ<Superscript>5</Superscript>-triazatriphosphines and poly[bis(4-fluorophenylamino)phosphazene]

2-(4-Chloro and 4-fluorophenylamino)-2,4,4,6,6-pentachloro-1,3,5,2λ⁵,4λ⁵,6λ⁵-triazatriphosphinines and poly[bis(4-fluorophenylamino)phosphazene] were synthesized by reactions of 4-fluoroaniline and 4-chloroaniline with 2,2,4,4,6,6-hexachloro-1,3,5,2λ⁵,4λ⁵,6λ⁵-triazatriphosphinin and poly(dichlorophosphazene), respectively, in tetrahydrofuran under argon at ?20°C, followed by heating under reflux. The products were isolated by column chromatography and were characterized by FTIR, NMR (¹H, ¹³C, ³¹P), and mass spectra, termogravimetry, and high-performance liquid chromatography. Antimicrobial activity of the monomeric compounds and polymer against 9 bacteria and 5 yeast cultures was evaluated by the disk diffusion method in dimethyl sulfoxide relative to a number of commercial antibiotics and antifungal agents. Aminophosphazene derivatives exhibited a broad spectrum of activity against both Gram-positive and Gram-negative bacterial with a magnitude comparable to reference antimicrobial agents. The polymeric product turned out to be more potent than the monomeric compounds.     

A one-dimensional silver(I) coordination polymer with saccharin and pyrazine: synthesis,crystal structure,thermal analysis,FTIR spectra,and DFT studies

A silver(I) complex of saccharinate (sac) with pyrazine (pyz), [Ag(sac)(pyz)] _n , has been synthesized and characterized by elemental analysis, IR, thermal analysis, and single-crystal X-ray diffractometry. The complex crystallizes orthorhombic space group Pnma with unit cell parameters of a = 13.0073(9) Å, b = 6.4907(6) Å, c = 13.4007(9) Å, V = 1131.37(15) Å³, and Z = 4. [Ag(sac)(pyz)] _n is a one-dimensional coordination polymer, in which the sac ligand acts as a monodentate ligand through the N atom and the trigonal silver centers are linked by the bridging pyz ligands. The individual chains are connected into two-dimensional supramolemular network by aromatic π(sac)···π(pyz) stacking interactions. The FTIR spectrum of [Ag(sac)(pyz)] _n has been recorded in the region and 4,000–400 cm^?1. The optimized geometry, frequency, and intensity of the vibrational bands of [Ag(sac)(pyz)] _n were obtained by density functional theory (DFT) at the B3LYP level. The vibrational frequencies were calculated and the scaled values have been compared with the experimental FTIR data. The observed and calculated frequencies are found to be in good agreement.     

[Hg2(μ‐bpe)(μ‐OAc)2(μ‐SCN)2]n,a New Two‐Dimensional Coordination Polymer Involving Three Simultaneously Bridging Ligands: 1,2‐Bis(4‐pyridyle)ethene,Acetate, and Thiocyanate

A new mercury(II) complex of 1,2‐bis(4‐pyridyle)ethene (bpe) with anionic acetate and thiocyanate ligands has been synthesized and characterized by elemental analysis, IR, ¹H NMR and ¹³C NMR spectroscopy. The single crystal X‐ray analysis shows that the complex is a two‐dimensional polymer with simultaneously bridging 1,2‐bis(4‐pyridyle)ethane, acetate and thiocyanate ligands and basic repeating dimeric [Hg₂(μ‐bpe)(μ‐OAc)₂(μ‐SCN)₂] units. The two‐dimensional system forms a three‐dimensional network by packing via π‐π stacking interactions.     

Two‐Dimensional Holo‐ and Hemidirected Lead(II) Coordination Polymers: Synthetic,Spectroscopic, Thermal,and Structural Studies of [Pb(μ‐SCN)2(μ‐ebp)1.5]n and {[Pb(μ‐OAc)(μ‐ebp)](ClO4)}n (ebp=4,4′‐[(1E)‐Ethane‐1,2‐diyl]bis[pyridine]; OAc=Acetato)

Two new coordination polymers of Pb^II complexes with bridging 4,4′‐[(1E)‐ethane‐1,2‐diyl]bis[pyridine] (ebp), thiocyanato, and acetato ligands, [Pb(μ‐SCN)₂(μ‐ebp)_1.5]_n ( 1 ) and {[Pb(μ‐OAc)(μ‐ebp)](ClO₄)}_n ( 2 ), were synthesized and characterized by elemental analysis, FT‐IR, ¹H‐ and ¹³C‐NMR, thermal analysis, and single‐crystal X‐ray diffraction. In 1 , the Pb²⁺ ions are doubly bridged by both the ebp and the SCN⁻ ligands into a two‐dimensional polymeric network. The seven‐coordinate geometry around the Pb²⁺ ion in 1 is a distorted monocapped trigonal prism, in which the Pb²⁺ ions have a less‐common holodirected geometry. In 2 , the Pb²⁺ ions are bridged by AcO⁻ ligands forming linear chains, which are also further bridged by the neutral ebp ligands into a two‐dimensional polymeric framework. The Pb²⁺ ions have a five‐coordinate geometry with two N‐atoms from two ebp ligands and three O‐atoms of AcO⁻. Although ClO acts as a counter‐ion, it also makes weak interactions with the Pb²⁺ center. The arrangement of the ligands in 2 exhibits hemidirected geometry, and the coordination gap around the Pb²⁺ ion is possibly occupied by a configurationally active lone pair of electrons.     

Structure of starch-bentonite gels

Mixed gels of starch and bentonite are investigated in the interval 0.056–0.089 of total solids/water ratio and 0-100% starch in the solids. The bentonite was a sodium calcium bentonite with a Na/Ca ratio of 1.76. In water it forms gels consisting of a network of band-type structures. Starch forms gels through hydrogen bonds between granules and/or amylose and amylopectin present on the external surfaces of granules and/or in fully stretched form. Mixed gels of bentonite and starch were obtained by adding corn starch granules to the already formed bentonite gels and heating the mixture above the Kofler gelatinization temperature. Amylose and amylopectin were adsorbed on strands of band-type structures of mont-morillonite lamellae. Starch gellation, e.g. diffusion of amylose out of the granule, was facilitated in the presence of bentonite. On the other hand, the presence of starch favored delamination of the montmorillonite particle into thinner lamellae. Maximum gelatinization and polymer adsorption were observed for gels with 20% starch and 80% bentonite. Montmorillonite networks formed the continuous phase for 0-80% starch. At higher starch concentrations, montmorillonite flakes were dispersed within the polymer network. Increase in the water content of the gels caused segregation of the bentonite and starch.     

Bis(2‐pyridyl­methanol)­bis­(saccharinato)­zinc(II) and ‐cadmium(II) at 120 K: three‐dimensional structures containing both N‐and O‐coordinated ambi­dentate saccharinate ligands

The title complexes [M(sac)₂(mpy)₂] [sac is saccharinate (C₇H₄NO₃S) and mpy is 2‐pyridyl­methanol (C₆H₇NO)], with M = Zn^II and Cd^II, are isostructural and consist of neutral mol­ecules. The Zn^II or Cd^II cations are octahedrally coordinated by the two neutral mpy and two anionic sac ligands. The mpy ligand acts as a bidentate donor through the amine N and hydroxyl O atoms. The sac ligands exhibit an ambidentate coordination behaviour; one is N‐coordinated and the other is O‐coordinated within the same coordination octahedron. The crystal packing is determined by C—H?O‐type hydrogen bonding, as well as by weak py–py and sac–sac aromatic π–π‐stacking interactions.     

Effect of chemical demineralization on thermal behavior of bituminous coals

Growing environmental concerns and the need for alternatives for oil and natural gas resulted in intensive researches on ultra clean coal (UCC). Therefore, the researches related to practice and application of various methods to produce UCC become more important. Thermal characterization of chemically demineralized coals by thermogravimetric analysis method is presented in this study. The aim of the study is to provide thermal data for HF–HNO₃ leaching system used for the production of UCC. Coal samples were first physically enriched by density separation. Then the enriched portion was chemically demineralized by using HF and HNO3, respectively. Ash content of coal samples were reduced to a range of 0.12–0.41% by chemical demineralization process. The petrographic, ultimate and proximate analyses were carried out to determine main features of samples. Physically and chemically enriched coal samples were then analyzed in a TG by two different techniques separately. The first technique covered thermal characterization of samples under non-isothermal conditions. Characteristic temperatures for each sample were obtained from the TG and DTG data. The second technique involved the determination of reactivity of in situ produced chars of each sample.